Sound Production — Royaal

Royaal Service 02 / 11

Sound
Production

Professional wedding sound production across Southern California. From intimate ceremonies to grand ballrooms, we make every word and every note easy to hear. With dedicated microphones, strategically placed speakers, and meticulous sound checks, every guest stays connected to the moment.

Instant Book

Royaal weddings sound production services

300+

Events Engineered

10K

Max Sq Ft Coverage

Audio Failures Ever

100%

Backup Equipment

The Setup

Every setup engineered for the room.

Before every event, we review your venue’s dimensions, ceiling height, room shape, and acoustic properties, and build a system configuration around what we find. The right speakers in the right positions, sized for your guest count and space.

Every system travels with a full backup rig. Spare powered speakers, a redundant wireless mic system, and a backup console are on-site at every event. Our engineer arrives hours before your first guest for load-in, system calibration, and a full walk-the-room sound check. By the time doors open, every seat in the room has been tested.

Instant Book All Services

Powered PA Speaker System

QSC K12.2 or K10.2, 1,000W two-way powered tops used as an industry standard for clean, punchy wedding audio.

Ceremony+

18″ Powered Subwoofer

QSC KW181 1,000W powered subwoofer for full, controlled low-end. Deep bass that you feel without rattling glasses or bleeding into adjacent rooms.

Ceremony+

Wireless Handheld Microphone

Shure SLXD2 or ULX-D wireless handheld for speeches, toasts, and ceremonies. Frequency-coordinated for clean, dropout-free audio in any venue.

Ceremony+

Wireless Lapel / Lavalier Mic

Shure SLXD1 bodypack with discreet lavalier for officiants, performers, or anyone who needs hands-free amplification without holding a mic.

Ceremony+

Digital Mixing Console

Allen & Heath SQ or Zed series digital console for precise per-channel EQ, dynamics, and multi-zone routing.

Ceremony+

Full Backup System

A complete redundant set of speakers, a spare wireless mic system, and backup mixer travel to every event. If anything fails, we switch over with minimal interruption.

Ceremony+

Dedicated Ceremony & Reception Rigs

Two independent systems run at the same time, one for the ceremony and one for the reception, so neither space is compromised.

Reception+

Cocktail Hour Fill Speakers

Ambient fill speakers for cocktail hour spaces, foyers, and patio areas routed from the main console. Consistent, even volume in every room your guests occupy.

Reception+

Live Instrument DI & Input Routing

Dedicated DI boxes and channel inputs for live musicians such as violin, saxophone, keyboard, or any instrument in your package, all integrated into the main console mix.

Grand

Real-Time SPL Monitoring

Calibrated perimeter SPL measurement throughout the event. Essential for outdoor venues, rooftops, and any space with noise ordinance restrictions.

Grand

Line Array System (Large Venues)

For ballrooms over 6,000 sq ft or 300+ guests, we deploy a flown or ground-stacked line array for even long-throw coverage. No hot spots or dead zones at the back of the room.

Grand

Our Process

How we engineer your sound

Venue assessment

We review your venue’s floor plan, room dimensions, ceiling height, and acoustic properties to design the right system configuration before we load in.

System design

Speaker placement, subwoofer positioning, microphone routing, and zone assignments are all mapped to your specific floor plan and guest count ahead of the event.

Load-in & calibration

We arrive well ahead of your event for a full load-in: line check, acoustic measurement, EQ calibration, and a walk-the-room volume test at every position.

Live monitoring

Our sound engineer stays on-site from first guest to last dance. Every mic, every speech, every song is monitored at the console and adjusted in real time.

Where We Work

Built for every SoCal venue

Hotel Ballrooms

Large, reverberant spaces that punish careless speaker placement. We use DSP-controlled systems with proper EQ and delay to eliminate echo and cover every seat evenly.

Up to 400 guests Multi-zone DSP EQ

Outdoor Estates

Open-air events require directional coverage and careful level management. We use distributed speaker runs and subwoofer cardioid arrays to keep neighbors happy and guests covered.

Weatherproof gear Distributed audio Noise-conscious

Intimate Venues

Small rooms need precision, not power. We use compact, high-fidelity systems with scaled-down PA tops and no unnecessary subs, delivering exceptional clarity at low SPL.

Under 150 guests High fidelity Low SPL

Multi-Room Events

Persian and South Asian weddings frequently run ceremony, cocktail, and reception in separate spaces simultaneously. We design fully independent audio zones routed from a central console.

Independent zones Central mix Cultural events

Rooftop Venues

Wind, ambient city noise, and strict dB ordinances make rooftops technically demanding. We use compact directional systems and real-time SPL monitoring to stay within limits.

SPL monitoring Compact rigs LA / OC venues

Historic Buildings

No drilling, no permanent rigging, no damage. We use speaker stands, freestanding arrays, and concealed cabling to work within the strict requirements of protected and historic spaces.

No rigging Clean cabling Venue rules respected

Packages

Sound packages for events of any size

Every package includes a professional on-site audio engineer, QSC speaker systems, wireless microphones, and full backup gear. Choose the scale that fits your venue and guest count. Pricing is custom-quoted based on event length, venue, and configuration.

Ceremony

Clean, reliable audio for your ceremony. Vows are heard clearly, and music is delivered perfectly.

2× QSC powered PA speakers
1× QSC powered subwoofer
2× Wireless handheld microphone
Wireless lavalier for officiant
Allen & Heath digital mixing console
DBX DriveRack PA2 processor & room EQ
On-site audio engineer
Full backup system

Instant Book

Custom pricing – based on event length & venue

Sound production FAQ

Still have questions? Reach out and we’ll walk you through exactly what’s right for your venue and event.

Ask Us Anything

Do you bring your own equipment or use the venue’s system?

We always bring our own gear. Venue house systems vary widely in age and quality, and we never rely on them. Your event gets a dedicated, tested rig, fully set up and dialed in for your space. Every cable, speaker, and connection is checked in advance so the system performs consistently from the first announcement to the final song.

Can you handle live musicians alongside the DJ?

Yes, this is standard for us. Live instruments are routed through dedicated DI inputs on the same console as the DJ, allowing seamless transitions between live sets and DJ music, with no level changes or dead air.

What happens if something fails mid-event?

We carry a full backup rig to every event – spare powered speakers, a redundant wireless mic system, and a backup mixer. If a component fails, we swap it out quickly. We’ve never lost audio at an event.

Do you comply with venue noise ordinances?

Yes. Wedding sound production in Southern California comes with real noise ordinance pressure. We know the dB restrictions at venues across LA and Orange County. For sensitive outdoor or rooftop events, we use real-time SPL monitoring at the perimeter so levels stay within limits all night.

Is sound production included in your DJ package?

Yes, professional sound is always bundled with our DJ service. We don’t offer DJ-only packages without audio because the system is a core part of the performance.

More Services